FAQ's
The draw weight on our bows can be adjusted within the weight range of the bow by tightening or loosening the limb bolts. If you need to adjust the draw weight outside of the bows weight range, you would need to order a new set of limbs from your local Prime dealer.
To change the draw length on your Form, you would just need to change our the draw length module.
For a left or right tear, you have multiple options to work on this which include micro adjusting the rest between 13/16″ – 15/16″ center shot, shimming cams, adjusting cable guards, etc.
For high/low tuning issues, you can tune with cam timing/sync, rest height, as well as nock height. For more in depth tuning help, we highly recommend reaching out to our techs over the phone or via email for tuning help or inquiring with your local Prime dealer.
Each one of our bows, dating back to the black series, was shipped with the tuning shims in the bow with the bow. If you no longer have them, they can be ordered on our webstore or through your local prime dealer.
The shim tool can be ordered through your local prime dealer or on our webstore.
Mods on the Divide do not require a bow press to change out.
With any warranty issues, we recommend getting the bow into your local Prime dealer for inspection as well as help ordering and installation of the new parts.