ROTO CAM SYSTEM

ADVANCED TECHNOLOGY.
THE ALL NEW ROTO CAMS FEATURE THE EASIEST METHOD FOR ADJUSTING DRAW LENGTH WITH A SELF CONTAINED SYSTEM OF A ROTATING MOD. NO BOW PRESS NEEDED FOR ANY ADJUSTMENTS. THE MODULES CAN BE MOVED IN HALF INCH INCREMENTS. THE LET-OFF IS BETWEEN 65% AND 90%, THE CABLE STOPS ARE INFINITELY ADJUSTABLE TO THE ARCHER’S DESIRED FEEL.

ROTO CAM SYSTEM

ADVANCED TECHNOLOGY.
THE ALL NEW ROTO CAMS FEATURE
THE EASIEST METHOD FOR ADJUSTING
DRAW LENGTH WITH A SELF CONTAINED
SYSTEM OF A ROTATING MOD.
NO BOW PRESS NEEDED FOR ANY
ADJUSTMENTS. THE MODULES CAN BE
MOVED IN HALF INCH INCREMENTS.
THE LET-OFF IS BETWEEN 65% AND 90%,
THE CABLE STOPS ARE INFINITELY ADJUSTABLE
TO THE ARCHER’S DESIRED FEEL.

STRONGER RISER

THE BLACK SERIES RISER HAS
ADVANCED TECHNOLOGY WITH A
STRONGER RISER DESIGN AND ALSO
HAS THE SAME CENTER BALANCED
GRIP POSITION. CENTERGY ADVANCED
TECHNOLOGY ALSO REDUCES PIN
FLOAT AND WILL YOU GET ON TARGET
FASTER AND STAY ON TARGET LONGER.
CHECK OUT THE VIDEOS TO LEARN
MORE ABOUT CENTERGY TECHNOLOGY.

STRONGER BALANCED RISER

THE BLACK SERIES RISER HAS ADVANCED TECHNOLOGY WITH A STRONGER RISER DESIGN AND ALSO HAS THE SAME CENTER BALANCED GRIP POSITION. CENTERGY ADVANCED TECHNOLOGY ALSO REDUCES PIN FLOAT AND WILL GET YOU ON TARGET FASTER AND STAY ON TARGET LONGER. CHECK OUT THE VIDEOS TO LEARN MORE ABOUT CENTERGY TECHNOLOGY.

Patented PARALLEL CAM TECHNOLOGY is designed to eliminate cam lean. This will make the bow easier to tune and provides a solid platform creating laser beam like nock travel.

CENTERGY TECHNOLOGY is a center balanced riser designed to actually help you be more accurate. Get there faster and stay there longer! Centergy Technology not only  provides great balance, but it will also help you shoot better.

FLEXIS AR is a adjustable flexing roller guard. This advanced technology is a very powerfull tool for tuning and also reducing side load caused by the cables. This reduction of torque in the riser will promote perfect nock travel.

82X ALUMINUM is a perfect mixture of strength along with being lightweight. A proprietary blend aluminum is not only stronger, but is also lighter then what the other manufactures are using.

COMPRESSION AXLE TECHNOLOGY is designed to use the axle bearing to its full potential. In addition to a solid platform this also prevents slippage of the bearings. This technology is commonly used in the motorcycle industry.

THE SWERVE was created to add stiffness to the riser and also syncs the top and bottom half of the riser. This technology drastically reduces variations in nock travel. With the Swerve, the Center Grip, and the Sherpa, the Prime riser is packed full of accuracy driven technology.